{
  "title": "Network Equipment Parsing",
  "description": "Parses Juniper, BDCOM EPON/GPON OLT, ZTE OLT, D-Link, and A10 ACOS syslog, plus a universal critical-severity fallback",
  "source": "pipeline \"Network Equipment Parsing\"\nstage 0 match either\n    rule \"juniper_ntp_unreachable\";\n    rule \"juniper_ssh_login_success\";\n    rule \"juniper_ssh_login_failed_tagged\";\n    rule \"juniper_ssh_failed_password\";\n    rule \"juniper_ui_configuration_error\";\n    rule \"juniper_chassis_alarm\";\n    rule \"olt_privilege_mode\";\n    rule \"olt_cli_logout\";\n    rule \"olt_ip_arp_moved\";\n    rule \"olt_config_write\";\n    rule \"bdcom_epon_dying_gasp\";\n    rule \"bdcom_epon_onu_config_error\";\n    rule \"bdcom_epon_hal_driver_error\";\n    rule \"bdcom_epon_onu_info_failed\";\n    rule \"bdcom_epon_onu_authenticated\";\n    rule \"bdcom_epon_onu_registered\";\n    rule \"bdcom_epon_onu_deregistered\";\n    rule \"bdcom_epon_oam_status\";\n    rule \"bdcom_olt_cli_login\";\n    rule \"bdcom_epon_config_saved\";\n    rule \"bdcom_epon_interface_link_state\";\n    rule \"bdcom_gpon_config_saved\";\n    rule \"bdcom_gpon_dying_gasp\";\n    rule \"bdcom_gpon_onu_offline\";\n    rule \"bdcom_gpon_onu_activate_failed\";\n    rule \"bdcom_gpon_onu_disabled\";\n    rule \"bdcom_gpon_onu_discovered\";\n    rule \"bdcom_gpon_onu_activated\";\n    rule \"bdcom_gpon_onu_deactivated\";\n    rule \"zte_gpon_dying_gasp\";\n    rule \"zte_gpon_onu_signal_degraded\";\n    rule \"zte_gpon_onu_lan_los\";\n    rule \"zte_epon_dying_gasp\";\n    rule \"zte_epon_onu_offline\";\n    rule \"zte_gpon_olt_pon_los\";\n    rule \"zte_optical_low_power\";\n    rule \"zte_power_over_voltage\";\n    rule \"zte_alarm_cleared\";\n    rule \"zte_cli_login\";\n    rule \"zte_cli_logout\";\n    rule \"juniper_ddos_violation_set\";\n    rule \"juniper_ddos_violation_clear\";\n    rule \"juniper_psu_failure\";\n    rule \"juniper_memory_parity_error\";\n    rule \"juniper_optical_low_power\";\n    rule \"juniper_qsfp_eeprom_failed\";\n    rule \"juniper_lacp_timeout\";\n    rule \"juniper_link_down\";\n    rule \"juniper_lag_state_change\";\n    rule \"juniper_snmp_auth_violation\";\n    rule \"juniper_asic_error\";\n    rule \"juniper_bgp_session_reset\";\n    rule \"juniper_bgp_addr_not_found\";\n    rule \"juniper_ntpd_resource_error\";\n    rule \"juniper_ssh_too_many_failures\";\n    rule \"juniper_config_commit\";\n    rule \"juniper_mgmt_login\";\n    rule \"dlink_system_reboot\";\n    rule \"dlink_optical_alarm\";\n    rule \"dlink_optical_recovered\";\n    rule \"dlink_interface_link_state\";\n    rule \"dlink_lag_state_change\";\n    rule \"dlink_gbic_detected\";\n    rule \"dlink_ntp_sync\";\n    rule \"dlink_management_ip_changed\";\n    rule \"dlink_telnet_login\";\n    rule \"dlink_telnet_logout\";\n    rule \"dlink_config_saved\";\n    rule \"a10_lsn_tcp_quota_exceeded\";\n    rule \"a10_lsn_session_quota_exceeded\";\n    rule \"a10_lsn_icmp_quota_exceeded\";\n    rule \"a10_bgp_maxpfx_warning\";\n    rule \"a10_session_opened\";\n    rule \"a10_session_closed\";\n    rule \"a10_session_timeout\";\n    rule \"a10_auth_success\";\n    rule \"generic_critical_severity\";\nend"
}